HPI RTr Tugphy truggy flux ou E-Revo?
Moderadores: Abib, gbatistela, mach, pixelman, Pimpolho
17 mensagens
• Página 2 de 2 • 1, 2
Re: HPI RTr Tugphy truggy flux ou E-Revo?
GARGER100 escreveu:Olá gente, descuuulpe meesmo a minha ignorância! Mas tenho uma dúvida sobre o HPI Sprint 2 Drift (motor Firebolt 15T). E descupem também por eu digitar neste fórum! Mas será q alguém saberia me dizer como q se faz a configuração de LIPO e Ni-MH no Esc?
Desde já agradeço...
Ótima tarde a todos...
Espero q ajude !!!
Abrs.
Elvis.
Here are the instructions to get it out of Auto-Lipo.
1. Hold full throttle while switching on esc. (All lights blink)
2. You will hear a short series of tones followed by a 2 second pause,
followed by a long series of tones. ESC will beep continuously with
flashing red LED .
(Green > RED)
3. Continue holding full throttle until you hear and additional long series of
tones with all LEDs flashing, then continuous beeping with Yellow LED
flashing.
(All>Yellow)
4. Release trigger allowing it to return to neutral position. ESC will beep
continuously while flashing Yellow LED.
(Yellow)
5. In order to turn Auto-Lipo OFF, move trigger to the full brake position. ESC
will beep continuously with RED LED flashing.
(OFF/RED)
6. Release Trigger allowing it to return to neutral position. All LEDs will flash
with a series of tones. ONce solid Yellow LED is present your ESC is ready
for use.
E para ATIVAR o modo LiPO novamente, faça até o procedimento 4, então faça:
5. in order to turn auto-lipo on, move trigger to the full throttle position. esc will beep continuosly with green led flashing
Re: HPI RTr Tugphy truggy flux ou E-Revo?
Olá amigo! Instruções assim q eu precisava mesmo, passo a passo... agora é só colocar no tradutor e daí BELEZA!
Ótimo domingo aí amigo, valeu, até+...
Ótimo domingo aí amigo, valeu, até+...
17 mensagens
• Página 2 de 2 • 1, 2
Quem está online
Usuários navegando neste fórum: Nenhum usuário registrado e 5 visitantes